- Work on SRA cyberlab. Something broken within the SSH tunnel.
HOURS Worked: 28 hours
- I did research what is happen in the SRA server. Here what I found:
- http://askubuntu.com/questions/230698/how-to-restart-the-networking-service
-----This will reset the network manager (service network-manager restart). Make sure they are active and correct IP address after checking the processor, hard drive space, ssh status, sshd status, and ifconfig. - https://www.blackmoreops.com/2015/03/26/setup-dhcp-or-static-ip-address-from-command-line-in-linux/ -----This setup the static IP address if needed.
- Crontab linux might solve the issue but please make sure to ask your supervisor to approve.
- If the ssh server keeps going down, make sure to update kali linux and ssh. Since it is not connected to the internet, plug it in where you can access to internet temporarily and update everything. Then vim the sshd_config and configure. After that service ssh restart and check the ssh status.
- plug to the ethernet
- go to setting, Network in particular.
- Go to IPv4
- change the it to DHCP Addresses which is automatic. DONE.
Next week objectives
Concerns and Issues
- Work on the server, it's disconnecting won't able to ssh into the server. I have to restart the network manager manually.
- Check Netmask
Concerns and Issues
- The SRA class might doing something in the interface or IP address that may cause the issue.
No comments:
Post a Comment